The default temperature differential is 1°. When your room temperature varies by 1°F, the thermostat
turns on your system. If you notice your system turning on and off too frequently, increase the
temperature differential.
1. Reset the thermostat by removing batteries for 10 seconds and then reinstall them.
2. For the first 10 seconds of operation, the temperature differential is displayed.
3. Press the or button to select desired setting.
Setting the Temperature Differential
The temperature displays in degrees Fahrenheit as a factory set default. Follow these steps to change to
degrees Celsius:
1. Remove the cover and batteries.
2. Move the jumper select marked
F
and
C
(see Parts Diagram on Page 1).
3. Reinstall the batteries and cover. Your LCD readout changes accordingly.
Changing Fahrenheit to Celsius
1.
Move the
Fan Auto/On
switch into the
Auto
position.
2.
Move the
Off/Heat
switch into the
Heat
position.
Starting the Thermostat
1. Place
Off/Heat
switch in the
Heat
position.
2. Press the or button a single time to see the
current temperature
setting.
3. Press the or button until the
desired temperature
setpoint displays.
4. The new temperature setpoint is automatically saved in memory. After 5 seconds, the display returns
to showing the current room temperature.
Setting the Setpoint Temperature
