Reset Wi-Fi Configuration Screen
After installation, you will have to reset Wi-Fi on your
thermostat to connect to the wireless network for the first
time. If you have previously connected the thermostat to
the wireless network but have changed your password or
installed a new wireless router, you will have to manually
reconnect the thermostat to the wireless network as if for
the first time.
1. On your thermostat, press
.
2. Press
, until
CONFIG
displays
under
MENU
.
3. Press
to select menu. The
reset Wi-Fi screen displays.
4. Change the setting to (yes) by
pressing
or
.
5. The
! will start flashing, indicating the thermostat in
Setup Mode and is searching for a wireless network.
Note: If the thermostat has been connected to a wireless network
before, the reset Wi-Fi configuration will be the last screen in the
Configuration Menu. To easily access the screen go into the
configuration menu and press
once—the reset Wi-Fi screen
will display.
Testing Wi-Fi Connection
1. In the app or through http://www.captouchwifi.com,
change fan mode to
ON
.
2. You will hear a click and see
displayed on the
thermostat next to fan. The thermostat is successfully
connect to the internet.
3. Change the fan mode to the desired setting.
Weather Menu
In addition to the menus listed in the manual, there is a
weather menu. The weather menu shows the high and low
temperatures for the next two days, as well as the outside
temperature, high and low temperature, and humidity for
the current day based on the zip code entered at
thermostat registration. To view the weather:
1. Press
.
2. Press
, until
WEATHER
displays under
MENU
.
3. Press
to select menu.
4. Press
and
to scroll through menu.
Note: For configurations, please follow
Configuration Mode Settings
in the
Installation, Application, and Operation
booklet that came
with the thermostat, starting on page 14.
Icon
Explanation
! Flashing
The thermostat is in Setup Mode and is searching for a wireless network.
Flashing
Wi-Fi is busy.
!
The thermostat is not connected to Wi-Fi. If the thermostat has successfully
connected to Wi-Fi previously, and no new conditions exist (i.e. password
change, wireless router change), the thermostat will automatically reconnect—
otherwise the thermostat will have to be reconnected to the wireless network
manually.
The thermostat is connected to Wi-Fi.
Troubleshooting
FCC Compliance Statement (Part 15.19)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Part 15.21 Statement
Modifications or changes made to the device, not approved by the originating party, may void user authority to operate the device.
FCC RF Exposure Statement
To ensure FCC and Industry Canada compliance, maintain a separation distance of 20 cm from device.
Section 7.1.2 of RSS-GEN
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Section 7.1.3 of RSS-GEN
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Symptom
Remedy
not displayed on
thermostat
Reconnect thermostat as if for the first time.
Thermostat ID location
The thermostat ID is attached to the top right corner of this document, as well as on the
back of the thermostat above the terminals.
Problems connecting
using the app
Connect your thermostat using a computer with Wi-Fi. If you are having trouble, the best
option is to use the WPS button (as described under
Using a Computer with Wi-Fi
).
Problem finding app
Apple devices require iOS 7.0 or newer software. Android devices require
Android
Honeycomb (Android version 3.1) or newer software.
7313 William Barry Blvd., North Syracuse, NY 13212
(
Toll Free
) 800-365-5525 (
Phone
) 315-233-5266 (
Fax
) 315-233-5276
www.icmcontrols.com
LIAF215
CONFIG
RESET
