7
최적의 청소를 위한 참고사항
●
R
ef
er
ence
Operating principles of robot cleaner
Running of robot cleaner
With about 20 detection sensors, it can avoid wall or objects (chair, vase, etc).
It recognizes the obstacle in front of fixed object with more than 13mm high and
does not fall down on the stairs with its floor detection sensor.
Suction of robot cleaner
This product has one main brush, two side-brushes and vacuum suction duct.
Side-brush gathers the dust on the floor by spinning and main brush will sweep up by rotating.
Fine dust will pile up in the dust bin through vacuum suction duct.
Empty the dust bin after use and wipe the main brush & side-brush regularly.
For further information, refer to <<Product control and maintenance>>(p.13~).
Using remote control
It is more convenient when you operate the robot cleaner with remote control.
- Press the power button of the remote control to start robot cleaner.
Press
power button
to stop the operation of the robot cleaner when it’s cleaning.
- User can choose one from four modes with Mode select button.
Select
Auto-mode
for general cleaning.
For wet mop cleaning, select
Mopping mode
.
Spot mode
is for cleaning the certain spot area and
Climb mode
is for cleaning the area with threshold.
For further information, refer to <<Cleaning mode>>(p.12).
- The strength of suctioning will be higher by pressing
Turbo button
.
- Use
Base button
to charge.
- Use
Clock button
to set the time.
- Use
Timer button
to timer the cleaning.
- Use direction button to change the movement of the robot cleaner.
- Backward direction button of the remote control does not work.
