Icidu NI-707502 Скачать руководство пользователя

Страница: 27 / 76

NI-707502

54M Wireless Router User Guide

Figure 5-10 BigPond Settings

User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive.

Auth Server - Enter the authenticating server IP address or host name.

Auth Domain - Type in the domain suffix server name based on your location. Eg,

NSW / ACT - nsw.bigpond.net.au

VIC / TAS / WA / SA / NT - vic.bigpond.net.au

QLD - qld.bigpond.net.au

Connect on Demand - You can configure the router to disconnect from your Internet

connection after a specified period of inactivity (Max Idle Time). If your Internet

connection has been terminated due to inactivity, Connect on Demand enables the

router to automatically re-establish your connection as soon as you attempt to

access the Internet again. If you wish to activate Connect on Demand, click the

radio button. If you want your Internet connection to remain active at all times, enter

0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to

have elapsed before your Internet connection terminates.

Caution: Sometimes the connection cannot be disconnected although you specify a

time to Max Idle Time, since some applications are visiting the Internet continually in

the background.

Connect Automatically - Connect automatically after the router is disconnected. To

use this option, click the radio button.

Connect Manually - You can configure the router to make it connect or disconnect

manually. After a specified period of inactivity (Max Idle Time), the router will

disconnect from your Internet connection, and you will not be able to re-establish

Содержание NI-707502













































































Результаты поиска

Содержание NI-707502

Отзывы:

Похожие инструкции для NI-707502

Бренды по названию

Популярные бренды

Icidu NI-707502, Руководство пользователя

Результаты поиска

Содержание NI-707502

Отзывы:

Похожие инструкции для NI-707502

Бренды по названию

Популярные бренды