Icidu NI-707502 Скачать руководство пользователя

Страница: 24 / 76

NI-707502

54M Wireless Router User Guide

use this option, click the radio button. If you want your Internet connection to remain

active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number

time in minutes that you wish to have the Internet connecting last unless a new link

is requested.

Caution: Sometimes the connection cannot be disconnected although you specify a

time to Max Idle Time, since some applications are visiting the Internet continually in

the background.

Click the Connect button to connect immediately, Click the Disconnect button to

disconnect immediately.

Click the Advanced Settings button to set up the advanced option, the page shown

in figure 5-7 will then appear:

Figure 5-7 PPPoE Advanced Settings

Packet MTU - The default MTU size is 1492 bytes, which value is usually fine. For

some ISPs, you need modify the MTU. This should not be done unless you are sure

it is necessary for your ISP.

Service Name/AC Name - The service name and AC (Access Concentrator) name,

these should not be configured unless you are sure it is necessary for your ISP.

ISP Specified IP Address - If you know that your ISP does not automatically

transmit your IP address to the router during login, click “Use the IP Address

specified by ISP” check box and enter the IP Address in dotted-decimal notation,

which your ISP provided.

Detect Online Interval - The default value is 0, you can input the value between 0

and 120. The router will detect Access Concentrator online at every interval between

seconds. If the value is 0, it means, do not detect.

DNS IP address - If you know that your ISP does not automatically transmit DNS

addresses to the router during login, click “Use the following DNS servers”

checkbox and enter the IP address in dotted-decimal notation of your ISP’s primary

Содержание NI-707502













































































Результаты поиска

Содержание NI-707502

Отзывы:

Похожие инструкции для NI-707502

Бренды по названию

Популярные бренды

Icidu NI-707502, Руководство пользователя

Результаты поиска

Содержание NI-707502

Отзывы:

Похожие инструкции для NI-707502

Бренды по названию

Популярные бренды