NI-707502
54M Wireless Router User Guide
-
5
-
2.3.2 The Rear Panel
The rear panel contains the following features. (View from right to left)
AC power socket: only use the power adapter supplied with the NI-707502 54Mbps
Wireless Router, use of a different adapter may result in product damage.
Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PCs
RJ45 WAN port for connecting the router to a cable, DSL modem, or Ethernet
Factory Default Reset button
There are two ways to reset the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults page
in the router's Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the router's power. Second,
press and hold the default reset button then turn on the router's power, until the
System LED lights up (about 3 seconds). Last, release the reset button and wait
for the router to reboot.
Note: Ensure the router is powered on before it restarts completely.
Wireless antenna
Figure 2-2 Rear Panel sketch
