icetro ISI-321TA Скачать руководство пользователя страница 38

38

Warranty

If no receipt or warranty certificate is received, the receipt/warranty certificate is lost, or the
date of purchase cannot be confirmed for reasons other than the foregoing, the warranty
expires within 6 months of the manufacturing date.

1. For issues with functions or performance during normal usage within the warranty period

1. If the warranty has expired

2. If installation is required again due to incorrect installation by the customer or the store 

3. If installation is required again due to the relocation of product or moving of the customer 

4. If the malfunction is not attributable to the product 

5. If the wrong power specification is applied

6. If any accessory or consumable other than that recommended by the manufacturer is used

7. If damage is caused by external force or dropping of the product

8. If damage is caused by natural disaster such as lightning, fire, earthquake, storm, typhoon, etc.

9. If any accessory/consumable goes obsolete or its service life comes to an end (packing, o-ring,

    blade, cleaning brush, etc.)

10. If foreign object is put into the product such as water, beverage, coffee, toy, etc.)

11. If external force is applied during installation or usage, causing damage or malfunction

12. If any accessory/consumable other than that made by the manufacturer is used

13. If directions for installation or standards are not followed

14. If the customer arbitrarily disassembled and lost or damaged any part

15. If a person other than an authorized engineer from the manufacturer repairs or modifies 

     the product

16. If malfunction is caused by failure to follow the "Safety warning / caution" on the user manual

17. If the water supply pipe froze and burst 

[ Free repair ]

[ Paid repair ]

Содержание ISI-321TA









































Отзывы: