icetro ISI-143S, Руководство пользователя

Страница: 12 / 40

12
Caburator control
The caburator is made up of two parts.
The part that is inserted into the hole of the mixing tank is called
the body and a tube is inserted into this. The tube has a hole at the
top and at the bottom. It can’t be inserted in the reverse direction.
The figure shows the caburator with a blocked hole.
If you align the caburator body with the area having no hole in
the upper area of the tube, then the hole in the lower area of the
caburator body will be blocked.
Condition of use: Initial soft ice cream making
This figure shows the caburator aligned with a large hole.
Align the caburator body with the large hole in the upper area of
the tube. Decrease the overrun and increase the amount of
ingredients injection in this way when you need continuous
vending of the product.
Condition of use: When the “Auto” mode is executed
This figure shows the caburator aligned with a small hole.
Align the caburator body with the small hole in the upper area of
the tube. Then, it will be aligned with the small hole in the lower
area of the caburator body. Increase the overrun and decrease
the amount of ingredients injection in this way when you expect a
small amount of sales.
Condition of use: When the “Auto” mode is executed
This figure shows the caburator aligned with a medium hole.
The caburator body with the medium hole in the upper area of
the tube. Then, it will be aligned with the medium hole in the
lower area of the caburator body. It will make the overrun and the
amount of ingredients injection adequate for sales.
Condition of use: When the “Auto” mode is executed
A small hole can improve the overrun, but it may depend on the
amount of ingredients in the mixing tank. The fewer ingredients in the
mixing tank, the higher the overrun is. The more the ingredients, the
lower the overrun is.
For your
information