MANUAL for kg20 kg6 kg6 bAsic
dr
y
ic
e
bl
a
sting
eq
uipm
ent
fro
m
icetech
|
P
A
ge
“ The combination of extremely high
cleaning speeds and a wide range of nozzles
means that even normally inaccessible parts
can be rapidly cleaned. ”
on/off
the emergency switch connects or disconnects the
voltage to the control circuit of the machine
.
The machine is only voltage free when the
battery plug on the battery is removed.
on:
the machine can be operated from the
trigger switch on the blasting gun.
off:
the trigger switch on the blasting gun
remains inoperative, and the battery indicator
is switched off.
kg6 basic:
No adjustment of the dry ice consumption
Fixed
predefined
consumption
rate.
kg6: Dry ice Dispensing
the knob is graduated from 0 to 10 and allows the
adjustment of dry ice consumption. the scaling
of the knob indicates only how much the knob is
turned in relation to the initial starting position.
kg: 15 to 40 | lbs: 33 to 88
kg20: Dry ice Dispensing
dry ice quantity per hour.
can be adjusted by pressing
or
.
kg: 16 to 55 | lbs: 36 to 122
filling up with Dry ice
The dry ice
tank
in
the
machine
must
be
filled
as
necessary with dry ice from an insulated container
delivered by the dry ice supplier.
the machine works with the dry ice tank cover
open, or closed. filling can thus be carried out while
the machine is in operation.
the safety regulations supplied by the dry ice
supplier must be followed when handling the dry ice.
Adjustment of Air Pressure
(working pressure)
the knob for adjusting the air pressure must be
pulled out and turned to the intended pressure
(as shown on the pressure gauge beside the knob).
after adjustment, press the knob in again to lock it
against unintentional turning.
the adjusted air pressure shown on the gauge is an
indication of the velocity at which dry ice (dry ice
pellets) strikes the object being cleaned. the read-
ing can then be compared with the results achieved
(the effectiveness of the blasting jet) to decide
whether further adjustment is necessary.
MANUAL for kg20 kg6 kg6 bAsic
dr
y
ic
e
bl
a
sting
eq
uipm
ent
fro
m
icetech
|
P
A
ge
0
handle with hose suspension.
2
handle for lid above the dry
ice tank. the lid can be
held open manually for
refilling.
control panel.
dry ice dispensing unit doses
dry ice into the blasting air
stream.
female connection for the
blasting hose (carrying the
air stream with its content of
dosed dry ice).
“ The equipment is designed to meet
the wishes of users. it is light, mobile,
reliable and easy to operate. ”
DrY ice MAcHiNe
6
main valve for the blasting
air stream.
When the machine is ready
for operation the valve opens
for blasting air every time the
trigger switch on the blasting
gun is activated.
When the trigger is released,
the valve cuts off the air
stream.
regulator which adjusts the
working pressure to the
value set by the air pressure
knob on the control panel.
filter/regulator for vibrator
and main valve for blasting air
(must be adjusted to a
value determined by
experience – but
min. 4.5 bar/65 psi and
max. 5.5 bar/79 psi).
24 V handy rechargeable
interchangeable battery.
0
Vibrator speed
:
the speed of the vibrator
(which prevents the dry ice
from bridging/clogging) can
be adjusted on the throttle
valve. the pressure must be
adjusted to a value which is
known to prevent bridging/
clogging.
control box.
2
6
0
