Installation
Installation of ceramic
Connect the Angle-valve at the Shut-off valve.
Insert the flange-packing into the flange.
flange-packing
flange
Turn the ceramic over. Place the flange at the bottom of ceramic and insert
the bolts assemble the flange and ceramic with packing nuts.
Lift up the ceramic and fix the flange at a drain.
Set the ceramic at level not to lean when
fixing the flange.
• Ceramic is heavy.
Recommend 2 workers when lifting up the ceramic.
flange
Drain
Bolts
Wax seal
Flange
or
11
11
3.
Unbox the bowl. Viewing from the back, you’ll notice 2 factory-installed braided
stainless steel lines. One leads to the front of the bowl and operates the bowl flush jet;
the other leads to the rim and operates the rim jet.
2a.
Insert toilet mounting bolts (not supplied) into drain flange.
IMPORTANT NOTE: Bolts
must be no longer than 2-1/2”.
2b.
Position waxless gasket (recommended, not included) on the floor flange. If a
traditional wax ring is used, affix to the bottom of the toilet bowl.
2a
3
2b
Rim jet hose
Flush jet hose
