background image

1

PH SUPERFLUSH

INSTALLATION AND MAINTENANCE INSTRUCTIONS

  

  THE FOLLOWING ARE CAUTIONARY STATEMENTS THAT MUST BE READ AND 
  FOLLOWED DURING BOTH INSTALLATION AND OPERATION

 

 WARNING:

 

Raritan Engineering Company, Inc. recommends that a qualified  person install this product.  

Equipment damage, injury to personnel or death could result from improper installation.  Rari-

tan Engineering Company,  Inc.  accepts no responsibility or liability for  damage to equipment, 

or injury or death to personnel,  that may result from improper installation or operation of this 

product.

  WARNING:

 

Hazard of Flooding

 

Any installation made below the waterline must have vented loops posi-

tioned properly and all hose connections should be double-clamped.  Both intake and discharge 

seacocks should always be in the closed position when the toilet is not in use.  Failure to do so 

may result in flooding, property damage and loss of life.

All models are suitable for use in conjunction 

with Raritan’s Electroscan

® 

 and Purasan

®  

Waste 

Treatment Systems. Both are U.S. Coast Guard 

Certified  Type  I  flow-thru  Marine  Sanitation 

Device (MSD) and/or holding tanks.

1-856-825-4900

www.raritaneng.com

L563  0316kgs

Model and Serial #:

The power of the legendary PHIIPUMP on a 

more universal and sleek base. 

The PH Superflush combines the efficient 

flushing action of the PHII with a more 

"universal base" for easier upgrades from 

competitive models. The PH Superflush also 

includes a slow close seat.

Содержание PH Superflush









Отзывы: