Icera S-20 RF, Инструкция по эксплуатации

Страница: 22 / 25

21
Adjusting the Remote Control Frequency - continued
6. On the remote control, press and hold the UP and DOWN water pressure
adjustment buons simultaneously for 4 seconds. Aer 4 seconds, the lemost LED
bar light under the ICERA logo should start to flicker.
7. To change the frequency channel, quickly press the either the UP or DOWN
water pressure adjustment buon again. The LED light should move on the remote
which indicates the change to the next channel. You can select any of the frequency
channels shown below except for Channel 1 which is the default channel.
8. Press STOP on the remote control to set the channel choice.
9. Make sure each unit in your household is set to a different channel.
FIRST: Press and hold together for 4 seconds un“l the
channel indicator light turns on.
SECOND: Press either buon again to change the
channel frequency.
THIRD: Press STOP to set the channel.