Ice VAC WD 20, Руководство по эксплуатации и обслуживанию

Страница: 19 / 32

19
9. Secure the vacuum head to the collection tank using the hooks
(1) on the side of the collection tank ( Fig. 5 ).
10. Insert the vacuum hose (5) from the vacuum nozzle (6) on the
collection tank, before inserting the vacuum hose press the
button (7) for unlocking the catch ( Fig.6 ).
11. Select the most suitable accessory for the task at hand (see the
chapter “ CHOOSING AND USING THE ACCESSORY ”).
12. Insert the selected accessory into the vacuum hose.
ATTENTION: Never use the appliance without the filters
supplied with the machine.
WORK
To start working, proceed as follows:
1. Carry out all the checks in the section “ PREPARING TO WORK ”.
2. Insert the plug (1) of the power supply cable (2) in the mains
supply socket (3) (
Fig.1
).
3. Switch on the machine by positioning the main switch (4) to the
work position “I” ( Fig. 2 ).
VACUUM CLEANERS
4. Proceed with the vacuuming.
ATTENTION : If, when working, the intensity of the vacuum
should drop, read the chapter “ CONTROL AND OPERATION ”.
To start working, proceed as follows:
1. Make all the checks listed in “ PREPARING TO WORK ”.
2. Free the vacuum head from the collection tank by releasing the
hooks (1) on the side of the collection tank, turn the levers as
shown by the arrow in the picture ( Fig.1 ).
3. Using the handle (2) on the vacuum head unit, remove the
vacuum head unit from the collection tank ( Fig.2 ).
4. Lay the head gently on the floor.
5. Remove the fabric filter (3) ( Fig.3 ).
WET VACUUM CLEANER
ATTENTION
: there must be no solid waste residue inside the
collection tank.
6. Using the handle (2) on the vacuum head unit, place the vacuum
head unit above the collection tank ( Fig.4 ).
ATTENTION : Place the machine's power supply cable in the
rear part of the tank.
1
5 6
6
5
7
4
ON
3
1
2
2 1
1
2 2
3
1 2 4 3