Ice VAC WD 20, Руководство по эксплуатации и обслуживанию

Страница: 18 / 32

18
To fix the front squeegee to the squeegee support, proceed as
follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see MACHINE SAFETY ’”).
ATTENTION:
You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands
.
ATTENTION: Check that the front squeegee support is
secured to the collection tank, and if not read the assembly
instructions supplied with the “FRONT SQUEEGEE” kit.
FRONT SQUEEGEE OPTIONAL FIXING KIT (ONLY FOR TOP VAC WD 60 VERSIONS)
2. Take hold of the front squeegee unit (1) ( Fig.1 ).
3. Insert first the right-hand pin (2) of the squeegee in the right-hand
slot (3) of the squeegee connection ( Fig.2 ).
ATTENTION : This operation can be simplified by first
loosening the hand-wheel (4) on the pin ( Fig.3 ).
4. Repeat the same operation for the left pin.
5. Then tighten the hand-wheels (4) to lock the squeegee in place
( Fig.4 ).
6. Insert the vacuum hose (5) of the squeegee into the relative joint
(6) of the vacuum nozzle ( Fig.5 ).
7. Insert the vacuum hose from the vacuum nozzle (7) on the
collection tank, before pulling the vacuum hose press the button
(8) for unlocking the catch ( Fig.6 ).
Before beginning to work, it is necessary to:
1. Before using, the appliance must be in order and safe to use
with the work equipment, especially the power cable and the
extension cable. If everything is not in order, the appliance must
not be used.
2. Take all necessary steps to ensure that the device is in a safe
condition (see “ MACHINE SAFETY ”).
3. Free the vacuum head from the collection tank by releasing the
hooks (1) on the side of the collection tank ( Fig.1 ).
PREPARING TO WORK
4. Using the handle (2) on the vacuum head unit ( Fig.2 ), remove the
vacuum head unit from the collection tank.
5. Lay the head gently on the floor.
6. Make sure that the sponge filter (3) has been correctly positioned
above the filter cage (4) ( Fig.3 ).
7. Depending on the type of work that needs to be done, select the
type of filter to insert.
8. Using the handle (2), on the vacuum tank lid, place the vacuum
tank lid on the collection tank ( Fig.4 ).
1
5
6
4
2
3
4
1
5
3 2
6
4
7 8
1
2 2 3
4
1 2 4 3