7
2.3 Unfold trike
Unwrap the trike main cruciform and sit it on a flat surface, preferably with something soft (cardboard/carpet)
under the frame to protect the paint.
Swing the rear
section of the frame
up and to the left and
then down to the
unfolded position.
Lift the QR (Quick
Release) latch to
retract the safety pin,
and close the hinge.
Make sure the safety
pin is properly
engaged.
Swing the QR and its
connecting pin
forwards 90 degrees
(into the slot on the
front part of the
hinge).
Tighten the QR on the
hinge. If the QR is
loose, the adjusting
nut may be tightened
slightly.
If you have ordered a model with a 26 inch or 700c rear wheel, then insert the rear wheel fully in the back of
the frame and tighten the quick release fully.
