22
2.18 Fit the mirror
The mirror comes with instructions showing
how it is to be assembled. The mirror is
mounted in the top of one of the handlebars
(right handlebar if you drive on the left, left
handlebar if you drive on the right). A plastic
plug is provided for the opposite handlebar.
Many people prefer to ride with a mirror both
sides.
If you have bar-end shifters, you will have a
mirror mount on the handlebars. Insert the
mirror into the end of the mirror mount and
tighten.
2.19 Fit the flag
Place the flag in the flag holder hole in the left or right
side at the top of the seat frame.
If you have a hard shell seat, the flag mounts in
the tube on the back of the seat.
2.20 Reflectors and Bell
Reflectors and a bell are supplied with your trike. The bell can be mounted anywhere on the handlebars
where it can be reached easily and doesn't interfere with steering the trike. The reflectors have brackets
which allow the front reflector to be mounted on the front derailleur post, and the rear reflector to be mounted
on the top rail of the seat.
2.21 Check nuts and bolts
Generally, check all nuts, bolts and quick-releases to make sure everything is tight.
3.0 Other Important Information
3.1 Adjusting the tracking
The tracking on your trike is pre-adjusted at the factory, and should not normally need checking. If you
experience abnormal tyre wear, you will find the instructions for checking and adjusting the tracking in the
Owner’s Manual
3.2 Serial Number
The serial number is marked on the underside of the main cross joint.
