ICE Games CANDY FACTORY Скачать руководство пользователя | Manualshive

Страница: 42 / 43

background image

42

I.C.E warrants all components in the

MINI CRANE

game to be free of defects in

materials and workmanship for a period of ninety days from the date of purchase.

This warranty does not cover items damaged due to normal wear and tear, sub-
jected to abuse, improperly assembled by the end user, modified, repaired, or oper-
ated in a fashion other than that described in the service manual.

If your

MINI CRANE

game fails to conform to the above-mentioned warranty, I.C.

E.'s sole responsibility shall be at its discretion to repair or replace any defective
component with a new or remanufactured component of equal to or greater O.E.M.
specification.

I.C.E. will assume no liability whatsoever, for costs associated with labor to replace
defective parts, or travel time associated therein.

I.C.E.'s obligation will be to ship free of charge, replacement parts by U.P.S.
Ground, U.S. mail, or other comparable shipping means. Any express mail or over-
night shipping expense is at the cost of the purchaser.

Products will be covered under warranty only when:

·    The serial number of the game with the defective parts is given.

·    The serial number of the defective part, if applicable, is given.

·    Defective parts are returned to I.C.E., shipping pre-paid, in a timely fashion, if
     requested by I.C.E.

·    A copy of the sales receipt is available as proof of purchase upon request of
     I.C.E.

I.C.E. distributors are independent, privately owned and operated. In their judg-
ment, they may sell parts or accessories other than those manufactured by I.C.E.
We cannot be responsible for the quality, suitability, or safety of any non-I.C.E.
part, or any modification, including labor, which is performed by such a distributor.

Warranty

«
...
40
41
42
43
»

Содержание CANDY FACTORY












































Отзывы:

Нет отзывов

Похожие инструкции для CANDY FACTORY

PAC-MAN BATTLE ROYALE

Бренд: NAMCO Страницы: 74

Бренд: MD SPORTS Страницы: 19

Бренд: I.C.E Страницы: 26

Bust-a-Move Frenzy

Бренд: Raw Thrills Страницы: 67

Бренд: LG Страницы: 2

Бренд: LG Страницы: 2

Бренд: LG Страницы: 2

Бренд: LG Страницы: 2

Бренд: LG Страницы: 2

Бренд: LG Страницы: 2

Бренд: LG Страницы: 48

Бренд: LG Страницы: 80

Бренд: LG Страницы: 84

Бренд: N&W Global Vending Страницы: 72

NICKTOONS nitro

Бренд: BMI Gaming Страницы: 54

Бренд: MBM Страницы: 20

Bikini Bottom Bowling

Бренд: Chicago Gaming Страницы: 42

Бренд: LAI Games Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды