Iccons GT6-IXF, Руководство пользователя

Страница: 8 / 20

8
ICCONS® GAS TOOL GT6-IXF USER MANUAL
5.4 Preparing The Fuel Cell
Caution !
• Never attempt to use fuel cell from other
manufacturers.
• Do not remove the cap when it is unused.
• Never drill a hole on the fuel cell.
• Do not inhale the gas. Breathing in the
gas could cause sleepiness, dizziness or
nausea.
• The fuel cell is not refillable, do not
attempt to refill the gas.
Steps:
First ensure to use the correct colour valve,
Please refer to the technical specifications.
1. Detach the cap, attach the valve by
pushing in the front edge.
2. Push the rear edge until it has “clicked”.
NOTE:
• Make sure the fuel cell valve is attached
firmly, if not, gas leakage may occur and
create hazards to users and bystanders.
5.5 Installing & Removing Fuel Cell
Caution !
• Make sure the trigger is not held while
inserting fuel cell.
• Remove fasteners from the magazine on
the tool before installing fuel cell.
• Do not depress tool on any surface /
ground while installing.
Steps:
1. Open the flap.
2. Insert the fuel cell, make sure the rubber
is placed underneath the fuel cell.
3. Direct the jet nozzle into the adaptor.
4. Close the flap.
5. For removing fuel cell, reverse the above
steps.
5.6 Loading/Unloading the Nails
Caution !
• Make sure the trigger is not held while
loading the nails.
• Do not depress tool on any surface /ground
while loading
Steps:
1. Load the nails into the slot located at the
rear of the magazine (1), press the nail
stopper button at the back of the magazine
(2) to allow the nails to slide forward into
the magazine.
2. Pull the follower holder to the rear of
the magazine over the nails and release
gently (3).
3. For removing the nails, release the
follower and allow the nails to slide to the
nail stopper.
4. Press the nail stopper button (2) at the
rear of the magazine and remove the nails.
5.7 Driving The Nails