background image

5

ICCONS® GAS TOOL GT6-IXF USER MANUAL

DANGER ! 

KEEP FUEL CELL AWAY 

FROM SMOKE AND FIRE

WARNING ! 

LIQUID GAS CAN CAUSE 

INJURY IN THE CONTACT WITH THE 
SKIN OR EYES

WARNING ! 

FUEL CELL CONTENTS 

ARE EXTREMELY FLAMMABLE

WEAR EYE PROTECTION

USE PROTECTIVE HAND WEAR

3.1  Safety for Handling the Fuel Cell

 - The fuel cell is always pressurized with 

propellant to sustain the fuel supply to the 
metering valve, even if the fuel is used up. 
Its contents are extremely flammable. The 
fuel cell is not reusable. Do not attempt to 
refill.

 - Do not spray towards a flame or an 

incandescent body. Keep away from any 
heat sources and from electrostatic charges.

 - Do not smoke when handling or loading fuel 

cells.

 - Do not expose to temperatures exceeding 

50°C.

 - Store and use the cartridge in a well-

ventilated area only. Do not inhale.

 - Do not pierce or burn the cartridge after use.
 - Keep away from children.
 - Dispose of only in designated places.
 - For optimum performance, use before 

the date indicated at the bottom of the 
cartridge.

3.2  Transport

The regulations by transport categories are:

 - Road/Rail: ADR/RID – UN code 2037 

class 2.1

 - Sea: IMDG – UN code 2037 class 2.1 EmS 

F-D, S-U

 - Air: IATA – UN code 2037 class 2.1

Goods must be accompanied by a transport 
emergency card for road UN 2037
Transport by post is not permitted.

3.3  Fuel Cell Storage

 - Stores and showrooms must comply with 

building regulations. All local instructions 
corresponding to fire regulations must be 
followed.

 - Where possible, store fuel at stable 

temperature in the range: 5 to 25°C. Do not 
expose to temperatures exceeding 50°C. Do 
not use a tool that emit flames, sparks or 
reach high temperatures in the vicinity that 
fuel cells are stored.

 - Do not store in designated thoroughfares, 

hallways or stairwells.

 - Stores in a well-ventilated area. Fuel cells 

must not be displayed in shop windows.

 - Storage with pyrotechnic products is not 

permitted.

3.4  First Aid

 - Direct contact with liquid gas may cause 

burns or frostbite.

 - In case of inhalation remove the person to 

fresh air, and encourage breathing. Should 
the casualty become unconscious, or 
breathing does not quickly return to normal, 
summon urgent medical assistance.

 - If gas gets into the eyes they should be 

flushed out with copious amounts of water. 
Skin contaminations should be removed with 
soapy water.

- If symptoms persist, seek medical assistance.

Содержание GT6-IXF





















Отзывы: