INSTRUCTION MANUAL CODE 80301 REV A
Sep/2016 (It can be modi
fi
ed without notice) Page: 16
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.jpselecta.es
8. MAINTENANCE & CLEANING
Maintenance
Unplug the equipment from the mains before handling inside.
The manipulation of the equipment internal electronic circuits by un-
authorized personnel can cause irreparable damage. Take it to one of
ICC’s authorized technical services.
Cleaning
To clean the accessible parts of the equipment, use a cleaner or a similar product.
Do not use aggressive solvents. To remove lime, you can use vinegar a bit lowered.
9. TECHNICAL SPECIFICATIONS
10. TROUBLESHOOTING
If an alarm message appears while using the equipment, correct the error to
continue the work. The messages indicate the error and its solution.
10.1 Safety thermostat
The message “SAFETY THERMOSTAT” appears due to:
- Overheating: The equipment has an independent safety device to prevent that
the temperature from the heating element rises uncontrollably, for example if it
runs out of water.
In this case, the mechanism disconnects the power of the heating element and,
once cooled, it must be reset to continue using your equipment. Press the reset
button on the back of the computer.
11. WARRANTY
This product is guaranteed for one year. It does not cover damages caused by
an incorrect use or causes beyond the control of ICC.
Any manipulation of the equipment by personnel not authorized by ICC automa-
tically cancels the guarantee.
80012
80014
Dimensions: High/wide/depth (mm)
280/180/190
Power suply voltage:
230 VAC 50-60Hz
115 VAC 50-60Hz
Electrical power (W):
2060
1060
Weigth: (Kg)
4.5
Fuse:
Reemplazable (Type: 10x5mm)
Temperature range:
From ... Ambient Temp + 5ºC ... to ... 200ºC
Temperature resolution:
0.1ºC
Timed operation:
Hours, minutes
Description
Cause
Resolution
It does not heat
The safety thermostat has skipped
Press the thermostat reset. See 9.1
Heating element is melted
Contact the technical service to replace
Temperature reading does not
match the external thermometer
Temperature imbalance
See 9.2 on how to act for adjustment
