MANUAL DE INSTRUCCIONES
CODIGO 80301 REV A Sep/2016 (Sujetas a modi
fi
caciones sin previo aviso) Pag.: 11
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail: [email protected] - website: http://www.jpselecta.es
4. PACKING LIST
The standard equipments consist on the following components:
Equipment
80012 / 80014
Instructions manual
80301
5. INSTALLATION & ASSEMBLY
Unpack the equipment and visually check that the contents are in good conditions.
Keep the package for some days.
5.1 Tank
A bucket or tank (
fi
g 5.1a) will be needed for the thermostat to operate. See ICC’s
product range on the catalogue. Our tank is made with a thermal insulation of
large capacity 0.034W / mC, 40mm thick which allows for a greater stability and
preservation of temperature.
Set the thermostat in the tank by a
fi
xing clamp (Fig 5.1b). Make sure that the
equipment is properly secured.
Place the equipment and the tank on a
fl
at level stable surface, suitable for the
equipment weight.
5.2 Connection to the mains
Plug the equipment to a near socket suitable for the equipment power. Use the
connection cable supplied or a similar one.
For your safety, the equipment must be earthed.
Before plugging the machine, check that the voltage supply and the frequency
corresponds to the one indicated in the equipment characteristics plate.
5.3 Removable grid
The computer comes equipped with a protection grid (Fig 5.3) to avoid burns and
jams in the recirculation pump.
This grid comes standard from factory but if it is necessary for any reason, as
repairing or cleaning, it can be easily removed.
Simply press the sides to loosen the screws from its location and the grid will
come out easily. No tool is required. To place it back, follow the same procedure
in reverse.
6. OPERATION
All the equipment functions are set with the touch screen. Gently press with your
fi
nger in the centre of each icon.
When starting the computer, the starting screen will be shown (Fig 6).
• SETTINGS:
-
Time and date: menu to set the date and time in the equipment.
-
Download logged data.
-
Temperature correction.
-
Temperature alarm limits.
• PROGRAMMING
-
The user can create up to 10 different temperature programs. Each one
allows up to 6 different values of the working temperature, so you can create
different forms of temperature evolution (Temp / time).
• TASK
It allows selection and starting of:
-
The working temperature or a temperature pro
fi
le.
-
Adjust the operating time.
AJUSTES
SETTINGS
PROGRAMACIÓN
PROGRAMMING
TRABAJO
TASK
Fig 6 Initial screen
Fig 5.1b Fixing clamp
Fig 5.1a Tank + cover
Fig 5.3 Clamp and removable grid
