background image

Содержание TOTALINE Gold P274-0100-C

Страница 1: ... cool setting must be at least 2 degrees higher than the heat setting for proper operation Fan Operation 33_e FAN button selects fan operation The fan can operate in either Fan ON or AUTO mode Press the FAN button to switch between fan ON or AUTO mode When the fan is set to ON FAN is displayed in the LCD on the thermostat The fan will mn continuously for im proved air circulation while in the ON p...

Страница 2: ...check for 24 vac between R and C E2 will clear 15 sec after proper voltage is restored E3 on temperature display The outdoor temperature sensor is open not connected or shorted SERVICE FILTER on temperature display After the selected number of hour of blower operation FILTER will display on LCD This is to remind the home owner to check the filter Press RESET FILTER button to clear display and rese...

Страница 3: ... Indicator _ lets you know it is time to clean or replace your system s air Mter Room Temperature Display shows current room temperature COOL ON Indicat e _ is displayed when th coolingequipment is operating _ HEAT ON Indicator is displayed when the heating equipment is operating i AUXILIARY HEAT Indicator is displayed when a heat pump system is operating with auxiliary heat air Mter Fan Button ch...

Страница 4: ...onsequence of faulty installation or application by others 3 Failure to start due to voltage conditions blown fuses open circuit breakers or other damages due to the inadequacy or interruption of electrical service 4 Damage or repairs needed as a consequence of any misapplication abuse improper servicing unautho rized alteration or improper operations 5 Damage as a result of floods winds fires lig...

Отзывы: