CAUTION
: the appliance is designed for the electrical specifications noted on the plate applied to the
rear of the appliance; before connecting to the electricity power supply refer to chapter 4.2 connecting to
the electricity supply.
3 CONSIGNING THE APPLIANCE
3.1 CHECKING PACKAGING UPON CONSIGNMENT
When the goods are received proceed with opening the packaging if there are no signs of damage. if
when the goods are delivered there are signs of damage to the packaging, such as agent or courier,
and within three days from the date indicated on the documents draw up a detailed list and report of all
damage to the goods
. Do not turn the packed goods upside down!
When transporting the package
make sure its four main points are firmly secured (maintain the goods parallel to the ground).
3.2 DISPOSING OF PACKAGING
The various items used for packaging (cardboard, pallets, plastic straps, polyurethane foam) are normal
urban waste products and can be disposed of without difficulty.
If the appliance is destined to countries where are specific standards regarding waste, dispose of
packaging respecting the standards and laws in force.
4 INSTALLING THE APPLIANCE
4.1 APPLIANCE LOCATION
4.1.1 The work surface where the HM-12/HM-22/HM-22B will be located must be suitable for the size of
the appliance, please refer to the measurements given in FIG 2.The work surface must be level and dry
and at a height of 80 cm from the ground with a temperature between 5
℃
and 35
℃
.
4.1.2 The power cord connected with the appliance must be grounded.
4.2WIRING DIAGRAMS HM-12/HM-22/HM-22A
FIG 3-Illustration
4.3 FUNCTIONAL CHECK
To confirm that the appliance works correctly proceed as follows:
Turn the control knob to the
“on” position and check that the screw feeder rotates anti-clockwise to
Weight
23.50kgs
24.00kgs
25.00kgs
Measurement
60.20x45.40x26.20cm
60.20x45.40x26.20cm
60.20x45.40x26.20cm
