6. Do not tighten the lock nut excessively;
7. Press the stop button when you have finished using the appliance, then dis-assemble the appliance
and thoroughly clean the openings and all other components.
6 REGULAR CLEANING
6.1 GENERALITIES
The appliance must be cleaned at least once a day or if necessary more than once.
Scrupulously clean all the various components of the HM-12/HM-22/HM-22B whether they
come in direct contact with the food product or not.
Never clean the HM-12/HM-22/HM-22B with a pressurized water-jet, industrial cleaners, and
brushes or any other type of cleaning utensil that could damage the surface of the appliance.
Before cleaning you must
disconnect the electricity supply plug isolating the appliance
from the main power circuit.
6.2 PROCEDURE TO FOLLOW FOR CLEANING THE APPLIANCE (see fig 6)
- remove the pestle and food tray;
- unscrew the lock nut and remove the disk, blade screw feeder, unscrew in the direction indicated by
the arrow.
- unscrew the knob and remove the grinder, always in the direction indicated by the arrow.
Now all the components can be washed (see fig 7 ) using warm water ( 50
℃
) and a neutral detergent.
To clean the main structure use a damp cloth, rinsing frequently.
The grater roller mounted on the HM-12/HM-22/HM-22B should be brushed cleaned. Carefully clean
the punched holes. Make sure all the components are completely dry before remounting them.
N.B. to remount the HM-12/HM-22/HM-22B follows the above diagrams:
1) Mount the grinder block and block it in position using the knob; the pin on the knob must be inserted
into the opening;
2) Insert the screw feeders into the grinder block make sure it is positioned correctly;
3) Mount the blade onto the square pin on the screw feeder and then mount the disk maintaining the
original coupling configuration;
4) Once all the components have been mounted secure by screwing the lock nut in place.
FIG 6-Removing components
1-lock nut 2-disk 3-blade 4-screw feeder 5-grinder block
