iCarsoft HD I, Руководство пользователя

Страница: 20 / 95

EN
17
Heavy Duty Diagnostic Tool HD I User’s Manual
correctly, and/or to check for Monitor Run Status.
Note: N/A means not available on this vehicle; INC means incomplete or not ready
and OK means Completed or Monitor Ok.
5.2.4 Data Stream
This item enables you to view all data stream items and the live waveform of
all selected items.
5.2.5 View Freeze Frame
When an emission-related fault occurs, certain vehicle conditions are recorded
by the on-board computer. This information is referred to as freeze frame
data. Freeze Data is a snapshot of the operating conditions at the time of an
emission-related fault.
Note: If DTCs were erased, Freeze Data may not be stored in vehicle memory
depending on vehicle.
5.2.6 O2 sensor test
The results of O2 sensor test are not live values but instead the results of the
ECU’s last O2 sensor test. For live O2 sensor readings, refer to any of the live
sensor screens such as Graph Screen.
Not all test values are applicable to all vehicles. Therefore, the list generated
will vary depending on vehicle. In addition, not all vehicles support the Oxygen
Sensors screen.
5.2.7 On-board monitor test
This function can be utilized to read the results of on-board diagnostic
monitoring tests for specific components/systems.
5.2.8 Evap System
The EVAP test function lets you initiate a leak test for the vehicle’s EVAP
system. HD I does not perform the leak test, but signals to vehicle’s on-board
computer to initiate the test. Before using the system test function, refer to the
vehicle’s service repair manual to determine the procedures necessary to stop
the test.
5.2.9 Vehicle Infomation
This option allows you to view the relevant information of the vehicle, including
VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration
verification number).