iCarsoft CR MAX BT, Руководство пользователя

Страница: 4 / 57

II
safety messages are introduced by a signal word indicating the hazard level.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury to the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury to the operator or to bystanders.
Safety Instructions
The safety messages herein cover situations iCarsoft is aware of. iCarsoft cannot know,
evaluate or advise you as to all of the possible hazards. You must be certain that any condition
or service procedure encountered does not jeopardize your personal safety.
DANGER
When an engine is operating, keep the service area WELL VENTILATED or attach a
building exhaust removal system to the engine exhaust system. Engines produce carbon
monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to
serious personal injury or loss of life.
SAFETY WARNINGS

Always perform automotive testing in a safe environment.
 Wear safety eye protection that meets ANSI standards.
 Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine
parts.

Operate the vehicle in a well ventilated work area, for exhaust gases are poisonous.

Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual
transmission) and make sure the parking brake is engaged.

Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
 Be extra cautious when working around the ignition coil, distributor cap, ignition wires and
spark plugs. These components create hazardous voltages when the engine is running.

Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.

Do not connect or disconnect any test equipment while the ignition is on or the engine is
running.

Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent on a
clean cloth to clean the outside of the equipment as necessary.

Do not drive the vehicle and operate the test equipment at the same time. Any distraction
may cause an accident.

Refer to the service manual for the vehicle being serviced and adhere to all diagnostic
procedures and precautions. Failure to do so may result in personal injury or damage to the
test equipment.
 To avoid damaging the test equipment or generating false data, make sure the vehicle
battery is fully charged and the connection to the vehicle DLC is clean and secure.

Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic
interference can damage the equipment.

Please ensure that the distance between the device and the human body is at least 20cm,
otherwise personal injury may be caused.