iCarsoft CR MAX BT, Руководство пользователя

Страница: 39 / 57

33
inputting TPMS sensor replacement IDs and testing sensors.
Select tire pressure sensor replacement (Front right wheel sensor) as an example.
NOTE
1) This function will require the sensor ID be inputted on the screen.
2) The sensor IDs can be read directly from the sensor or by using a sensor activation tool
that can read the ID.
3) Once the IDs have been entered, the vehicle may have to be driven at a certain speed for
a certain time to complete procedure. Follow the instructions displays.
Select tire pressure sensor replacement (Front right wheel sensor) as an example.

Tire pressure sensor replacement:
During this application the wheel unit 8-bits identifications will need to be entered using
the screens provided. The sensor identifications can be accessed by reading directly from the
wheel unit or by using the identification reading tool. On completion, a specific road test will be
required followed by the tire pressure monitor system confirmation application.
NOTE
The vehicle must remain stationary for at least 15 minutes with the ignition off, this will place
the sensors into sleep mode. The vehicle must be driven for at least 15 minutes at a speed
higher than 20 kph to ensure the module has learned the sensor identifications and positions.
For other services, please follow the on-screen instructions to operate. On completion of
the drive cycle, carry out the tire pressure monitor system test application.
5.12 Gearbox Reset
After the gearbox is disassembled or repaired, it will cause shift delay or shock problems. At
this time, this function needs to be executed to make the gearbox automatically compensate
according to the driving conditions in order to achieve a more comfortable and more ideal shift
quality.
5.13 Air conditioning service
After the refrigerant, blower pump, etc. in the air conditioner are replaced, the air
conditioning system may not work normally. At this time, this function is needed to activate the
air conditioner for a period of time to match the replaced refrigerant, blower pump and other
automotive components.
5.14 Air Filter
The engine is a very precise machine part, and even the smallest impurities will cause the
wear of the engine. Therefore, the air must be filtered by the air cleaner before entering the
cylinder. Therefore, the disassembly, maintenance or replacement of the air filter will cause
some particulate impurities in the air to enter the car parts. At this time, the air filter learning