iCarsoft BMM V3.0, Руководство пользователя

Страница: 33 / 55

EN
29
operation of the fuel injector, you need to carry out this operation to replace
the fuel injector code.
1) Select the "Injector" icon in the service function icon, Select the correct
vehicle according to the on-screen instructions.
2) Select the "Powertrain Set - Up - Injector Replacement" option in the
function list. The screen indicates that the injector configuration value
needs to be updated.
3) Follow the screen operation step by step, press the [OK] to perform the
next step. In this process, the engine should be shut down, and the power
supply voltage is 12.5V. Pay attention to the prompt of fuel injector code
on the screen.
4) As shown in the figure below, select the serial number of the fuel injector
to be replaced.
5) Read the 10 digit sensor code from the replaced injector, press the [OK]