iCarsoft BMM V3.0, Руководство пользователя

Страница: 32 / 55

EN
28
2) Turn on the ignition switch and perform the brake exhaust procedure as
required. Carefully read the operator information that appears on the
screen. Note that this function cannot be operated while moving the
vehicle.
3) Turn on the left front exhaust screw as required by the screen and keep
pressing the brake pedal. Follow the instructions on the screen. After a
certain period of time, release the brake pedal and close the front exhaust
screw. The operation is complete.
4) Open the right front exhaust screw as required by the screen, and follow
the same method until the operation is complete.
5) After completing the operation, press [OK] to exit.
6.2.8 Injector
When individual injectors are renewed, the injector control module
requires the new configuration values for the injector to perform correctly.
Write injector actual code or rewrite code in the ECU to the injector code of the
corresponding cylinder so as to more accurately control or correct cylinder
injection quantity, After the ECU or injector is replaced, injector code of each
cylinder must be confirmed or re-coded so that the cylinder can better identify
injectors to accurately control fuel injection. (Take LandRover as a sample).
If the vehicle has replaced the fuel injector, in order to ensure the normal