iCarsoft BMM V3.0, Руководство пользователя

Страница: 18 / 55

EN
14
between different vehicles. Read full electronic system module live data
by text value or waveform. Also you can save these data by press
[REC] .
When there is [W] in the upper right corner of the data stream, select
[WAVE] to display the waveform, as shown in the following figure:

Actuation Test --- The "Actuation Test" function accesses vehicle specific
subsystem tests and performs component tests. The available test
functions vary according to the manufacturer, year and model, and the
menu will only show the available test options.
When performing the actuation test, the tester inputs the command to the
ECU to drive the actuator. This test can monitor the operation of the
actuator by reading the ECU data of the engine. For example, by
repeatedly switching the two working states of the solenoid valve, relay
and switch, it can determine whether the system or components are
working normally, and execute the command of the switch on the door or
window.

Left / Right turn signals
Through the left / right turn signal action test item, you can control
the left and right turn signal flashing to test whether the turn signal
works normally.