ICAROS CLOUD, Инструкция по эксплуатации, Страница: 26 / 40

max.
21
5 mm
min.
60
mm
ICAROS Cloud Home
1.1
1.2
1.3
2.1 2.2
2.3 2.4 2.5 2.6 2.7
3.1 3.4 3.5 3.2
3.3
TABLET HOLDER
Switch the screws position to avoid contact with any buttons.
The tablet holder is compatible with the ICAROS Cloud Pro & Home.
Loosen the tubble screw on lower the back of the tablet holder and
slide the lower bracket down insert your device and slide it back up.
Now fasten the tubble screw.
Devices need to measure minimum of 60 mm and maximum
215 mm in width to fi t into the tablet holder.
Medium Height Setup Low Height Setup
*recommended
Tablet Setup Controller Holder Setup
Use a 4 mm Allen key to
switch between controller
holder options.
4 mm Allen k
ey
Proceed as in the steps 2.3 - 2.7 and make sure to
position the controller holder like depicted in the fi -
gures 3.5 and 3.6.
Your mobile device might get damaged. Make sure your device has a tight fi t and and check if your device is tightly secured and doesn`t shift while working out. ICAROS GmbH
will not be responible for any damages on your mobile device.
High Height Setup
Put the controller on the hooks. Slide it down until it clicks. To remove it just follow the steps in reverse. You can adjust the angle of the controller so it is pointed straight forward.
2 Device Setup
1 Tablet holder Compatability
3 Controller Holder Setup
Open Close
4 Setup Options
ICAROS
Controller
Holder
PICO G2
Controller
Holder
25