ICAROS CLOUD, Инструкция по эксплуатации, Страница: 16 / 40

Creases & pressure points in the memory foam
CAUTION
Even after the ICAROS Cloud has been inflated, wrinkles and pressure points may still be visible in the EVA memory foam of
the ICAROS Cloud. However, these traces disappear after a few days as long as the ICAROS Cloud is not folded again in these
places.
1 - 2 Tage nach Aufbau 3 - 5 Tage nach Aufbau 6 - 8 Tage nach Aufbau
Visual pressure orientation
Please follow the operating instructions when setting up the ICAROS Cloud. It is very important that you do not inflate the lower
chamber of the ICAROS Cloud too much. Use the following picture as a guide to find the correct pressure for the lower chamber.
If the ICAROS cloud looks like this, the air pres-
sures are correct.
If the ICAROS Cloud appears extremely vaulted,
the lower chamber is inflated too much. Let the
air out until your ICAROS Cloud looks like the
illustration above.
Warranty Note
Excessive air pressure can damage the ICAROS Cloud. Damages caused by excessive air pressure
are not covered by guarantee.
15