TURNING THE TONOMETER ON AND LOADING THE PROBE
Pressing the Select button
Pressing the Measure button
1.
Press the Select or Measure button to turn the tonometer on. Illustrations of these alternative ways of starting:
Remember to use the wrist strap
2.
Open the probe tube by removing the cap and
insert the probe into the probe base as shown in
the image.
3.
When the Play symbol appears on the display,
the tonometer will be ready for measurements
2.
3.
To change the setting for different species
press the
Select button to access the menu. Press Navigation
buttons and select SETTING by pressing the Select
button. Toggle the settings by Navigation buttons and
select a specie setting by pressing Select button. To
measure return to MEASURE by navigation buttons.
MEASUREMENT
1.
Bring the tonometer near the patient’s eye. (It’s not necessary to look at the display during the measurement
since the device gives sound signals about errors etc.)
Avoid excessive restraining, as it may alter the IOP. Patient’s head should be held as lightly as possible;
be careful not to put pressure on the neck or the eye ball. If a collar is worn; make sure it is not too tight
or remove it for the measurement.
Содержание TONOVET PLUS
Страница 1: ...QUICK GUIDE ENGLISH...
