PALOMBA FLOOR STANDING BASIN
page 1 of 7
Disclaimer:
Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 1
SPECIFICATIONS
Recommended use
Domestic, Hotel and Commercial
Colour
White
Finish
LAUFEN Clean Coat
Weight
45kg
Capacity
3.3L
Taphole availability
1Taphole only
Integrated overflow
No
Plug & waste
Suits 32 x 40mm non-overflow waste (not supplied)
Installation
S-Trap Only
Fixing
Fixed to the floor using fixing set provided
To see the complete LAUFEN range go to
www.reece.com.au/bathrooms
Dimensions are nominal measurements only
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
CLEANING RECOMMENDATIONS
140
900
195
115
400
525
280
80
>~300
120
30
385 x 310
