iCanTek iCanView220, Руководство пользователя

Страница: 15 / 20

iCanView220/220W User’s Guide
Rev.1.0 (Aug. 2006)
X\ – \Z
Setup password default. For new connection, you need
to input changed values for
corresponding fields. Do not disclose
these values to others and memorize
these values.
Password : dw2001
User Admin
& Time
Setup
Current Time
Input correct time in this field.
Default value :
2001/1/1
6. Connect the input and output signals to iCanView220/220W.
Connectors Function Signal description Number
LINE-
In/MIC
Audio in
Connect microphone or output from
audio devices.
1
Line Out
Audio out for
speaker
Audio from remote site is available
from this connector in bi-directional
audio mode. Connect speaker with
amplifier.
1
Connecting
Alarm Sensor
IR sensor, Motion Sensor, Smoke
Detector…
1
Sensor In
/Alarm Out
Connecting
Alarm
annunciating
device
Siren, Flashing Light, … 1
100Base-T
Network
connection
Connect iCanView220/220W to the
network, LAN, ADSL or Cable modem.
1
DC Power Apply DC Power to network camera 1
7. Remote video connection to iCanView220/220W
Run i-NVR on your PC. Before connecting to iCanView220/220W it is needed to configure
the connection information on the i-NVR. More detailed information of using “ i-NVR ” can be
found in [ i-NVR User’s Guide ].