iCanTek iCanView220, Руководство пользователя

Страница: 10 / 20

iCanView220/220W User’s Guide
Rev.1.0 (Aug. 2006)
XW – \Z
Line out in bi-directional audio mode.
Use Standard stereo earphone jack for the connection.
y 100BaseT (RJ45) : 100Mbps Ethernet connector (RJ-45) with proprietary PoE.
- Link LED : Continuous yellow light means that network cable is plugged in. It will flicker
when there is traffic.
- Status LED: Green color indicates that the camera is in normal operation mode, while RED
color indicates that the camera is in abnormal condition.
y RS-232C
3 Pins from the connector are assigned for RS-232 port. Please note that the bottom most pin
is numbered as 1.
Pin Description Misc.
2 TxD of RS-232C For debugging & factory use only.
3 RxD of RS-232C For debugging & factory use only.
5 Ground of RS-232C For debugging & factory use only.
y Analog Video Output
This can be used for installing network camera and adjust the viewing angle etc.,
A video cable which is supplied with network camera is used to get the analog video signal
from the camera module and to output to analog monitor.
To Analog Video Out of network camera To Analog Monitor
Figure 2-4. Analog Video Cable
y BLC -
isjO㡃ὧ⽊㩫₆⓻P
iˆŠ’GsŽ›Gj–”—Œ•šˆ›–•㦮 㭖Ⱖ⪲㍲ 㡃ὧ㦮 ┾㩦㦚 ⁏⽋䞮₆ 㥚䞲 ₆⓻
䞒㌂㼊Ṗ 㡃ὧ㌗䌲 䞮㠦㍲ 㾂㡗♶ ἓ㤆 ⳾┞䎆㠦 㨂㌳ 㔲S ⺆ἓ㦖 ⹳ἶ 䞒㌂㼊⓪ 㠊⚷Ợ ♮㠊 䞒㌂㼊Ṗ 㔳⼚⿞⓻
㌗䌲Ṗ ♮⓪ ộ㦚 ⹿㰖䞮₆ 㥚䞮㡂 ╖⚦♲ ₆⓻㦒⪲S 䞲Ⱎ❪⪲ 㡃ὧ㌗䌲㦮 䢪㰞㦚 Ṳ㍶㔲䋺₆ 㥚䞮㡂 ㌂㣿♮⓪ ₆