iCanServer540R User’s Guide
downloaded from iCanTek’s home page.
Refer to
[6.4. How To Upgrade Your iCanServer540R
System]
.
Add PTZ File
Add a new PT driver software via the network. PT driver can be
downloaded from iCanTek’s home page.
Refer to
[6.4. How To Upgrade Your iCanServer540R
System]
.
Factory
Default
Setting
Re-initialize the video server to factory default state.
By checking on a Radio button “Except Network Configuration”,
you can preserve the parameters for the network. Checking on
“All”, will return all the parameters to factory default state.
Once iCanServer540R is re-initialized as factory default
state, it should be set-up again using IP-Installer.
System Reset
Perform remote reset by clicking the “CONFIRM” button.
All previous connections will be disconnected upon
reset. iCanServer540R
does not resume the connections
and the users must re-connect to the server manually.
HDD Format
The HDD on iCanServer540R is formatted. A small HDD area
reserved for storing user’s data (WebHard) is not affected by
the formatting to preserve user’s data stored in this area.
Rev.1.0 (Nov. 2006)
38
