iCandy pear
Latching and reclining of the seat is similar
to the lower seat.
25. Assembled Seat Units
Assembled seat units with hoods, bumper
bars on the PIP subframe.
26. Reclining the seat unit
To recline the upper and lower seat units
press the grey buttons on both sides and
move into required reclined or upright
position. Release buttons when in desired
position. Ensure both grey buttons are
latched flush with the side frame moulding.
27. Removal of Seat Units
Depress both grey side buttons and pull up
seat frame to remove.
7. Warning
Check that the car
seat is correctly engaged before use.
28. Fitting the Maxi Cosi Car Seat
adaptors - Lower position (sold
separately)
Locate and fit the lower car seat adaptors,
coded Yellow by pushing them into PIP
subframe, ensure the grey buttons latch flush.
29. Fitting the Maxi Cosi Car Seat
- Lower position
Fix the car seat onto the adaptors, ensuring
the car seat latches (clicks) secure.
30. Fitting the Maxi Cosi Car Seat
adaptors - Upper position (sold
separately)
Locate and fit the upper car seat adaptors
(as supplied with the iCandy apple
pushchair or purchased separately), coded
Blue by pushing them into PIP subframe,
ensure the grey buttons latch flush.
31. Fitting the Maxi Cosi Car Seat
- Upper position
Fix the car seat onto the adaptors as
shown, ensuring the car seat latches
(clicks) secure.
32. Removal of Maxi Cosi Car
Seats
Depress both release buttons as shown, lift
car seat to remove.
33. Securing your child using the
5-point safety harness
Feed the buckle tongues 1 & 2 into the
buckle housing 3 and click together.
Adjust your five-point harness at the points
indicated in the direction of the double
arrows as required.
To unfasten the harness squeeze in the
buckle tongues 1 & 2 and pull out of the
buckle housing 3.
D-Rings are provided for attaching an extra
harness complying to BS 6684.
8. Warning
To avoid serious
injury, always use the 5-point safety
harness.
12, 13 & 14. Folding the chassis
Remove all seat units, PIP subframe and
adaptors from chassis before folding.
Unload all products from the shopping
basket. Press the grey handle height
adjuster button 1 whilst depressing the
secondary lock button 2. When the handle
is at its lowest point, push downwards to
disengage and fold the stroller 3. Apply the
hold together latch as per picture 1.
4. Warning
The maximum load
for the shopping basket is 5kg.
15, 16, 17 & 18. Fitting the PIP
Subframe
Unfold and engage the PIP subframe into
the chassis receptors. Apply firm
downward pressure on the centre of the
subframe until clicks are heard to ensure
positive locking. To release, push down on
the PIP subframe and depress both grey
side buttons before removing from the
connectors on the chassis. The PIP
subframe is hinged for compact storage.
Check the location of the ‘upper saddle’ on
the forward basket frame. Align as
necessary.
Check the location of the ‘lower saddle’ on
the rear basket frame. Align as necessary.
The PIP subframe can be fitted in 2 ways
depending on the combination you are wanting
to achieve. See the iCandy pear options.
19. Seat unit/carrycot canopies
(hoods)
Identify and fit the colour coded hoods to
the seat frame connectors. To remove,
depress the hood location side tabs and
release.
20. Bumper bars
Identify and fit the colour coded bumper
bars, locking and releasing is actioned by
depressing small headed grey buttons
simultaneously. Check to make sure they
are secure by pulling on the bars.
21. Adjusting the footrest
Press both buttons on the sides of the leg
rest, adjust to desired position and release
to lock.
22. Bumper bar blanks
Bumper bar/carry handle blanks can be
fitted if preferred.
23. Fitting the seat units colour
coded Yellow.
Insert the seat adaptor into the lower
connectors on the PIP subframe colour
coded yellow. The seat unit adaptors and
connectors are grooved to prevent
incorrect orientation.
5. Warning
This seat is not
suitable for children under 6 months.
6. Warning
Check that the pram
body (carrycot) or seat unit
attachment devices are correctly
engaged before use.
24. Fitting the seat units colour
coded Blue.
Insert the seat adaptor into the upper
connectors on the PIP subframe colour
coded blue. The seat unit adaptors and
connectors are grooved to prevent
incorrect orientation.
