34, 35 & 36. Fitting the PVC Raincover
Fit raincover over hood and around the
back of the seat before pulling over footrest.
9. Warning
never leave
raincovers, hoods and aprons on or
over the pushchair indoors, in a hot
atmosphere or near a heat source,
your child may overheat.
Conversion of seat unit to
carrycot
Box 1
a
Carrycot fabric x 1
If lower carrycot has been purchased it will
be colour coded
yellow.
If upper carrycot has been purchased it will
be colour coded
blue.
37. Remove hood
Depress hood hinge tabs and release from
connector sockets. Retain for re-fitting as
seat unit and carrycot hoods are common.
38. Remove bumper bar (if fitted)
Simultaneously depress small grey buttons
and release bumper bar away from frame.
Retain bumper bar for re-fitting as carrycot
handle.
39, 40, 41 42, & 43. Converting the
seat unit
Unfasten all the seat unit zips surrounding
the frame and footplate. Disengage both
halves of the zips.
With the seat unit facing downwards,
release the velcro tabs on the underside of
the seat base adjacent to leg rest support
tube as shown.
Release seat support panel clips shown
pressing down simultaneously with your
thumbs.
Withdraw seat support panel from seat
fabric cover. Retain and store in a safe
place.
Finally, release secondary webbing straps
by splitting split ring out of webbing loops.
The frame is now ready for fitting of
carrycot fabrics.
44. Fitting of carrycot fabrics
Slip the leg rest section of the seat frame
into the carrycot fabric shown ensuring
footplate locates through the slot.
45.
Secure secondary webbing straps by
threading split ring through webbing loops
on both sides of the frame.
46.
Fold upper edge rim of fabric over
frame. Locate and fasten all zips securely.
47.
Cover leg rest support tube with
internal velcro panel as shown.
48.
Locate, position and attach press
stud to footplate are as shown.
49.
Locate and fasten apron zips on both
sides. Apron can be tucked inwards at
foot end of carrycot if not required.
50.
Adjust the internal depth of each
carrycot as required (dependent upon
configurations) by locking under base
clips together as shown.
51.
Base plate must be removed for
washing. Removal is achieved by
releasing velcro on underside of carrycot
at head end. Withdraw the base board.
Head and toe end support stiffeners are
located within zipped pockets as shown.
Please remove before washing the carrycot
fabric.
Take care as stiffeners are a tight fit. With
the stiffeners removed, the carrycot can be
folded flat for compact storage and travel.
Re-fit the hood as reverse of point 1.
important:
When re-fitting the bumper
bar/carry handle, check that no fabric
becomes entrapped. The handle locks
(clicks) into pace by depressing the small
grey button on each side. Ensure security
of handle before lifting or using carrycot.
Your carycot is now ready to use
Locate and fit carrycot as per fitting
instructions of the seat units within these
instructions.
Fitting of an additional safety mattress is
allowable and will assist in the hygiene and
cleaning maintenance of your carrycot.
important:
Make sure the mattress thickness
does not exceed 10mm.
Mattress Sizes:
Lower carrycot 67 x 27 cms
Upper carrycot 68 x 28cms
10. Warning
The iCandy pear
carrycots are only suitable for
children who cannot sit up unaided,
roll over and cannot push itself up
on its hands and knees. Maximum
weight of the child : 9 kg (approx 6
months).
11. Warning
Do not let other
children play unattended near the
carrycot.
12. Warning
Do not use if any
part is broken, torn or missing.
13. Warning
never use a
mattress thicker than 10mm. When
a mattress is purchased separately
it should conform to BS1877-part 10
:1997.
important:
1. Use only on a firm, horizontal, level and
dry surface.
2. The handles and the bottom of the
carrycots should be inspected regularly for
signs of damage and wear.
3. Be aware of the risk of open fire and
other source of strong heat, such as
electric bar fires, gas fires etc, in the vicinity
of the carry cot.
4. The iCandy pear carrycot is not a safe
means of transport by car and should
NEVER be used as such. Use an approved
car safety seat for transport by car.
Carrycot cleaning information
The exterior of the carrycot, hood and
apron of the iCandy pear carrycot may be
cleaned with a damp cloth.
Unfasten from frame and remove
baseboard and end stiffeners. Hand wash
using a soft detergent at a maximum
temperature of 30 degrees (see instructions
on washing label). Do not place in washing
machine or tumble-dryer!
iCandy pear
