IC Realtime Pixim I-Sniper EL-720, Руководство по установке

Страница: 9 / 12

16 17
5. Fluorescent
Color Rolling Reduction (CRR)
OFF : Not used CRR.
CRR : This color roll reduction mode will work with
manual and auto-iris lenses. However, using it
with auto-iris lenses typically results in
noticeable levels of noise in shadows or dark
areas in the image.
CRR2 This color roll reduction mode works with
auto-iris lenses ONLY. Noise levels are
reduced in shadows or dark areas in the
image compared to the noise levels present
when using the CRR mode, but, dynamic
range is also reduced further.
6. ICR DVR TOOL
Ideal setting with IC Realtime DVR series.
7. RS-485..
*How to control OSD menu over RS485:
“PRESET” key or “IRIS OPEN” key.
OFF : Default Setting.
EDGE SERIES : EDGE series
MAX SERIES : MAX series
FLEX SERIES : FLEX series
ELITE SERIES : ELITE series
CAMERA# : Available to set up from 1 to 255.
PROTOCOL : Supports PELCO-D.
BAUD RATE : Select a baud rate.(2400, 4800, 9600,
19200)
RETURN. Move to MAIN MENU.
1) Set communication speed on the camera to 9600bps.
2) Accord the ID of the camera with the DVR or PTZ
controller. The factory default ID of the camera is
“CAM1”.
3) On the DVR or PTZ controller, press 95 then press
4) When the MAIN MENU pops up on the screen, move
the cursor using a joystick to the desired menu to
control. When entering a Sub menu, press “IRIS
OPEN” momentarily.
ICREALTIME
WDR CONTROL MEDIUM
BLC OFF
AGC NORMAL
WHITE BALANCE ATW
>FLUORESCENT <OFF>
ICR DVR TOOL OFF
RS-485..
FLIP
OFF
SAVE&EXIT DEFAULT CANCEL
ICREALTIME
WDR CONTROL MEDIUM
BLC OFF
AGC NORMAL
WHITE BALANCE ATW
FLUORESCENT OFF
>ICR DVR TOOL <OFF>
RS-485..
FLIP
OFF
SAVE&EXIT DEFAULT CANCEL
ICREALTIME
WDR CONTROL MEDIUM
BLC OFF
AGC NORMAL
WHITE BALANCE ATW
FLUORESCENT <OFF>
ICR DVR TOOL <OFF>
>RS-485..
FLIP OFF
SAVE&EXIT DEFAULT CANCEL
RS485 SETUP
>CAMERA # 1<1>255
PROTOCOL PELCO-D
BAUD RATE 9600
RETURN
1. WDR(Wide Dynamic Range) CONTROL
Light level is controllable with provided easy-to-use
OSD menu that enables the camera to be ideally set
up for the most of different levels of backlit or contrast
lighting situations.
LOW : Dynamic range level similar to that of CCD
cameras.
NORMAL: Suitable for most indoor scenes without
windows or difficult lighting
MIDDLE: Suitable for normal outdoor scenes and indoor
scenes that include windows.
HIGH : Maximum setting for harsh outdoor scenes
2.BLC(Back Light Compensation)
OFF : Highlights in image are prioritized.
ON : Shadows in image are prioritized.
3.AGC (Auto Gain Control)
LOW : Low gain limit.
NORMAL: Normal gain limit.
HIGH : High gain limit.
4. White Balance
The Automatic White Balance provides an extensive
range color temperature control that covers form
2,000
ȋ
K
to 11,000 ȋ
K
generating natural color image
without being red or blue in varying light conditions.
ATW: Auto-tracking white balance mode.
AWB : Set white balance now and lock it
ICREALTIME
>WDR CONTROL <MEDIUM>
BLC OFF
AGC NORMAL
WHITE BALANCE ATW
FLUORESCENT OFF
ICR DVR TOOL OFF
RS-485..
FLIP
OFF
SAVE&EXIT DEFAULT CANCEL
ICREALTIME
WDR CONTROL MEDIUM
>BLC <OFF>
AGC NORMAL
WHITE BALANCE ATW
FLUORESCENT OFF
ICR DVR TOOL OFF
RS-485..
FLIP
OFF
SAVE&EXIT DEFAULT CANCEL
ICREALTIME
WDR CONTROL MEDIUM
BLC OFF
>AGC <NORMAL>
WHITE BALANCE ATW
FLUORESCENT OFF
ICR DVR TOOL OFF
RS-485..
FLIP
OFF
SAVE&EXIT DEFAULT CANCEL
ICREALTIME
WDR CONTROL MEDIUM
BLC OFF
AGC NORMAL
>WHITE BALANCE <ATW>
FLUORESCENT OFF
ICR DVR TOOL OFF
RS-485..
FLIP
OFF
SAVE&EXIT DEFAULT CANCEL