background image

·

Please read the manual carefully before the installation in order to make use the

  camera to be set up correctly and to have the best picture quality. 

·

 Please keep the manual in good condition for your future reference and service 

  application. 

·

 Installation and services should only be carried out by an authorized personnel

  according to local safety regulations. 

·

 If any liquid or solid matter gets into the housing, immediately disconnect the camera

  from power supply and have it checked by your authorized dealer before reusing. 

·

 Avoid installing the camera at extremely hot or cold places. 

·

 If you are not a certified person, never try to dismantle the camera. To avoid electric

  shock, never remove the screws or covers. There are no parts inside that need
  maintenance by the user. All maintenance should be carried by qualified personnel. 

·

 Avoid installing the camera at a place of high humidity. 

·

 Avoid installing the camera at the place exposed to gas or oil. 

·

 Keep the top glass of the lens always clean in order to obtain the best picture quality

  all the time. Be careful not to be stained by fingerprint. 

·

 Don't face the camera directly toward sunlight or sunlight reflecting area.

  CCD may go defective at this condition. 

·

 Please give a special attention to keep the unit from dangerous drop or

  external shock during the process of transportation or handling.

·

 Never try to touch the camera in wet hand. It may cause an electric shock. 

·

 Do not expose the camera to radioactivity. It causes a serious damage on the CCD.

This publication is provided “AS IS” without warranty of any kind, either express or 
implied, including but not limited to, the implied warranties of merchantability, fitness 
for any particular purpose, or noninfringement of the third party's right. This publication 
could include technical inaccuracies or typographical errors. Changes are added to the 
information herein, at any time, for the improvements of this publication and/or the 
corresponding product(s). 

4

5

1. Precautions

2. Limitation of liability

In no event shall seller be liable to any party or any person, except for replacement or 
reasonable maintenance of the product, for the cases, including but not limited to 
below : 
(1) Any damage and loss, including without limitation, direct or indirect, special,   
     consequential or exemplary, arising out of or relating to the product; 
(2) Personal injury or any damage caused by inappropriate use or negligent operation  
     of the user;
(3) unauthorized disassemble, repair or modification of the product by the user; 
(4) Inconvenience or any loss arising when images are not displayed, due to any reason  
     or cause including any failure or problem of the product; 
(5) Any problem, consequential inconvenience, or loss or damage, arising out of the  
     system combined by the devices of third party. 
(6) Any claim or action for damages, brought by any person or organization being  
     photogenic subject, due to violation of privacy with the result of that surveillance- 
     camera's picture, including saved data, for some reason, becomes public or is used  
     for the purpose other than surveillance. 

3. Disclaimer of warranty

Содержание Pixim I-Sniper EL-720













Отзывы: