IC Realtime Pixim I-Sniper EL-720, Руководство по установке

Страница: 7 / 12

12 13
8. Dimensions (mm)
100
Ø120
122
Ø140
7. Troubleshooting
Problems Troubleshooting
Nothing appears on
the screen.
· Please check that the power cord and line connection
between the camera and the monitor are fixed properly.
· Please check that you have properly connected VIDEO
cable to the camera.
· VIDEO output jack. Check DC Iris cable on Lens is
properly connected.
The image on the screen is
dim.
· Is lens stained with dirt? Clean your lens with soft,
clean cloth.
· Set the monitor to proper condition.
· If the camera is exposed to too strong light, change
the camera position.
The image on the screen is
dark.
· Adjust the contrast feature of the monitor.
· If you have an intermediate device, set the
GG^\ȳGVGoTG—™–—Œ™“ GOw“ŒˆšŒGŠŒŠ’G›ŒG”—Œ‹ˆ•ŠŒP
The camera is not working
properly, and the surface of
the camera is hot.
· Please check that you have properly connected the
camera to an appropriate power source.
Color is not correct.
·
Gw“ŒˆšŒGŠŒŠ’G›ŒGšŒ››•ŽG–G~op{lGihsGzl{|wG”Œ•œU
The screen flickers
continually.
· Please check that direction of camera is turned toward
the Sun.
RS-485
communication fails.
·
Gw“ŒˆšŒGŠŒŠ’G›ŒG—–“ˆ™› G‰Œ›žŒŒ•GyzT[_\Gj–•›™–“G
GGw–™›Gˆ•‹GyzT[_\GŠˆ‰“ŒU
·
Gw“ŒˆšŒGŠŒŠ’GG›ŒG•›ˆ“Gˆ“œŒG–G›ŒGyzT[_\G
Communication setup matches between camera and
OSD Controller or DVR.
· We recommend that you make ground connection
between camera and controller for safe communication
control.
[_\Gj–•›™–“Gi–ˆ™‹Gj–••ŒŠ›–•Gw–™› yzT[_\Gj–•›™–“Gw–™›
ORPjvuulj{pvuG{lytpuhsO{yRP [_\R
OTPjvuulj{pvuG{lytpuhsO{yTP [_\T
|hy{Gtvkl yl{Gwr{
Item Camera ID
ih|kGyh{l
Initial value 1 9600
_TuvulTX luhisl
QGyzT[_\Gj–””œ•Šˆ›–•GŒš›ˆ‰“š”Œ•›G•›ˆ“Gˆ“œŒ
·
~Œ•GyzT[_\GŠˆ‰“ŒGšG•–›G—™–—Œ™“ GŠ–••ŒŠ›Œ‹S
GGhGžˆ™••ŽG”ŒššˆŽŒG˄lyyvyGyzT[_\Gj–••ŒŠ›–•UG
GGw“ŒˆšŒG™ŒŠ–••ŒŠ›Gˆ•‹GyŒ‰––›˅GšG‹š—“ˆ Œ‹U{Œ•G—“ŒˆšŒG
turn off the power and connect the cable again.