IC Realtime Max 4, Руководство пользователя

Страница: 42 / 131

©2009 IC Realtime, Inc. 42
Latch: when detection is complete, the auto trigger continues detecting for a
specified time. The value ranges from 10-300 seconds
Show message: You can choose to pop up a message to alarm you in the local
screen.
PTZ activation: Here you can set PTZ movement when detection occurs. Such as
go to preset, tour &pattern when there is an alarm. Click “ select ” you can see an
interface is shown as in Figure 4-15.
Period: Click set button, you can see an interface is shown as in Figure 4-16.
Here you can assign business days or non-business days. In Figure 4-16, click
set to see the interface shown in Figure 4-17.
Anti-dither: Here you can set anti-dither time.
Alarm output: when alarm occurs, the DVR enables peripheral alarm devices.
Tour: Here you can enable the tour function when alarm occurs. It is a one-
window tour. Please go to chapter 5.3.9 Display for tour interval setup.
Note:
In this interface the copy/paste function is only valid for the same event type. For
example, you can not copy a channel setup in video loss mode to camera
masking mode.
Figure 4-19
4.6
4.6 4.6
4.6 AAAAlarm Setup and Alarm Activation
larm Setup and Alarm Activation larm Setup and Alarm Activation
larm Setup and Alarm Activation
All alarm devices should be properly connected prior to configuring alarm settings.
4.6.1 Alarm Menu
From the main menu, navigate from Setting then to Alarm. You can see an
interface is shown as in Figure 4-20.
4.6.2 Alarm setup
Alarm interface is shown as below. See Figure 4-20.