IC Realtime Max 4, Руководство пользователя

Страница: 38 / 131

©2009 IC Realtime, Inc. 38
At the bottom of the menu, there are color bars for your reference. Green stands
for regular recording, yellow stands for motion detection and red stands for alarm
recording.
After completing all the setups please click save button.
4.4.1.1 Quick Setup
This function allows you to copy one channel setup to another. After setting in
channel 1, you can click copy, and turn to channel 2 and then click paste.
You can finish setting for one channel and then click save, or you can finish all
setup and then click save to memorize all the settings.
4.5
4.5 4.5
4.5 Detect
Detect Detect
Detect
4.5.1
Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface.
See Figure 4-13. There are three detection types: motion detection, video loss,
camera masking.
4.5.2
Motion Detect
Channel: select the channel you want to configure for motion detection.
Event type: from the dropdown list you can select the detection type.
Record Channel: select the channel to activate recording function once the
detection occurs. Make sure you have set MD record in the schedule menu
(Main Menu->Setting->Schedule
Latch: when detection is complete, the auto trigger continues detecting for a
specified time. The value ranges from 10-300 seconds
Region: Select region from Figure 4-14 and you can specify a motion detection
zone. There are 396(PAL)/330(NTSC) small zones.
Sensitivity: Ranges from 1-6. 1 is the lowest and 6 is the highest level of
sensitivity.
Show message: You can choose to pop up a message to alarm you in the local
screen.
PTZ activation: Here you can set PTZ movement when detection occurs. Such as
go to preset, tour &pattern when there is an alarm. Click “ select ” - you will see an
interface is shown as in Figure 4-15.
Period: Click set button, you will see an interface is shown as in Figure 4-16.
Here you can assign business days or non-business days. In Figure 4-16, click
set to see the interface shown in Figure 4-17.
Anti-dither: Here you can set anti-dither time.
Alarm output: when alarm occurs, the DVR enables peripheral alarm devices.
Tour: Here you can enable the tour function when alarm occurs. It is a one-
window tour.
Highlight icon to select the corresponding function. After configurations are made,
choose “save” to save and the system will go back to the previous menu.
Note
: In motion detection mode, you can not use the copy/paste feature to set
channel setup. The recorded video option of each channel may not be the same.