IBT Technologies IB500, Руководство пользователя

Страница: 67 / 78

SCSI DRIVERS INSTALLATION
IB500 User’s Manual 63
Installing SCSI Driver for DOS
The DOSSETUP.EXE program installs the 16bit ASPI drivers, SCSI
CD-ROM driver and the Microsoft CD extensions. This program will
automatically create or modify the AUTOEXEC.BAT and CONFIG.SYS
files on your hard drive. To complete CD-ROM installation, you will
need MSCDEX.EXE pre-installed on the hard drive or on a floppy disk.
MSCDEX.EXE is on MS-DOS 6.2x Setup Disk Number One. Be sure
that you know the location and the path of MSCDEX.EXE prior to
running DOSSETUP.EXE. The hard drive will need MS-DOS 6.xx
installed or it will need to be formatted with the /s option (i.e. - bootable
format) prior to running Initio DOSSETUP.EXE. From the x:\ DOS
prompt type
DOSSETUP and press Enter . NOTE: x = drive letter of
floppy drive used. After DOSSETUP.EXE completes, be sure to reboot
system so changes take effect.
Installing SCSI Driver for Windows 95/98
Files you need:
Information script files for installation: INIA100.INF.
Miniport device driver: INIA100.MPD.
Installation:
A: New Windows 95 installation:
B. Adding INI-A100U2W to an existing Windows 95/98:
C. Updating device driver:
A: New Windows 95/98 installation:
1. Run SETUP.EXE from the Windows 95/98 CD-ROM and follow the
directions on the screen.
2. After a Windows 95/98 session is established, select My Computer/
Control Panel/System/Device Manager/Other devices/PCI SCSI
Bus Controller
from the Windows 95/98 desktop.
3. Click the Driver tab, then click the Change Driver tab.
4. Double click SCSI controllers , then click the Have Disk button.
5. At the prompt, type in A:\win95 , insert Initio INI-A100U2W driver
disk 1, and click the OK button.
6. Select Initio INI-A100U2W Host Adapter , click the OK button.
Windows 95 will copy INIA100.MPD to your hard disk. Reboot to
complete the driver installation.