Last update:
2022-05-19
IBS
Precision Engineering • Eindhoven • NL • +31 40 290 1270
User Manual |
P3
1
Approvals and safety considerations
The CPL350 is compliant with the following CE standards:
Safety: EN 61010-1:2010
EMC: IEC 61326-1:2013, IEC 61326-2-3:2013
To maintain compliance with these standards, the following operating conditions must be maintained:
•
All I/O connecting cables must be shielded and less than three meters in length
•
Use the included CE approved power supply. If an alternative power supply is used, it must have equivalent
CE certification and provide safety isolation from the mains according to IEC60950 or 61010.
•
Sensors must not be attached to parts operating at hazardous voltages in excess of 33VRMS or 70VDC
Use of the equipment in any other manner may impair its safety and EMI protections.
2
Overview
The CPL350 Capacitive Displacement Sensor provides one channel of noncontact displacement measurement
for precision position and displacement applications. This manual will provide you with all the information you
require to get the greatest benefit from your system.
Engineers, technicians, and maintenance personnel will find the CPL350 invaluable for high precision
measurements of mechanical displacement where contact with the target is not possible nor advisable. Targets
such as high-speed rotating spindles, or parts that could be damaged or deflected by contacting probes can be
measured with confidence and accuracy.
3
System contents
Your system includes this manual, the CPL350 Capacitive Sensor electronics, power supply, one probe, and a
NIST traceable calibration sheet.
4
Calibration
Your system was calibrated with a precision calibrator designed by Lion Precision. The system is calibrated with
nanometer precision. All of our calibrations are traceable to NIST.
IBS Precision Engineering recommends that you have your system recalibrated at the factory once a year to
ensure maximum accuracy.
Содержание CPL350
Страница 1: ...www ibspe com User Manual P1 CPL350...
