18
Instruction Manual C100-AE
rS 232
In this menu the data output via RS232 interface is programmed.
So.C.
oFF / on Set continuous data output on RS232
oFF
- Continuous data output is disabled
on
- Continuous data output is enabled
Notice :
The continuous data output is generally done only in conjunction with the RSA
adapter ( output of the measured value from the numeric display as analogue
voltage
).
So.t.
oFF / on RS232 data output triggered by foot switch
oFF
- No data output by foot switch
on
- Current measured value transmitted by foot switch
AutoCA
In this menu you can select between the options
"Automatic zero adjustment"
using one
master, and
"Automatic gauge calibration"
using two masters.
on
- Automatic gauge calibration with 2 masters is on.
oFF
- Automatic zero adjustment with 1 master is on.
Notice :
In Programming mode, select the "PrESEt" menu and make sure that the
master value programmed for zero adjustment or the master values programmed
for gauge calibration are correct.
Col.diS.
In this menu the start point of the column display is set.
StAndA.
- Column moves from bottom to top
CEntrE
- Column moves from the centre to top or to bottom
toP
- Column moves from top to bottom
Содержание C100-AE
Страница 30: ...30 Instruction Manual C100 AE ...
