• Press S1 or S2 to toggle the alarm function on or off. If the alarm function is “on”, the alarm icon will be shown.
1. The alarm sounds daily for 20 seconds at alarm time if the alarm function is “on”. Press any button to stop the alarm sound.
2. The alarm function is automatically set to “on” when entering setting mode.
3. If 24-hour display format is selected for Time mode, there will be noAM flag “A” or PM flag “P” for alarm time.
4. If there is no button operation for about 3 minutes in setting mode, the watch will return back toAlarm mode automatically.
• Press and hold S1, S2, S3 and S4 simultaneously for 1 second, all segments will be “off”, then release the buttons and the watch will be reset.
After reset, test patterns will be displayed for a few seconds, and finally the display will be as follow:
Remarks:
How to reset the watch:
Wecker
Wecker
ALARMSYMBOL
S1 / S2
32
