• Press S3 to show Pulse mode, mode prompt “PULS” will be displayed for 1 second first.
• Heart icon flashes when heart rate signal is received from the transmitter and the heart rate is shown at the middle row of the display.
• If both heart rate zone and zone alarm are set to “on”, 1 “Beep” sound will be given every 5 seconds when heart rate is below “Zone Low Limit” and 2
“Beep” sounds will be given every 5 seconds when heart rate is above “Zone High Limit”. And the displays will be as follow:
1. If no heart rate signal is received for 1 minute, the link between the watch and the transmitter will be cut off automatically, and “- - -” (not flashing) will
be shown at the middle row of the display. To re-link, press S4, and “- - -” will start flashing or heart rate will be shown.
2. Heart rate measurement will not be taken when EL back light is “on” or alarm is sounding.
3. If heart rate zone is set to “off”, there will be no zone alarm or high/low limit indication.
4. If no heart rate signal is received and there is no button operation for about 3 minutes in Pulse mode, the watch will change to Time mode
automatically.
Remarks:
Below “zone low limit”
Above “zone high limit”
27
