6. “Time in Zone” is the time (excluding 1/100-seconds) that the heart rate stays within the high/low limit set.
.
8. If there is no heart rate signal received since entering Chronograph mode, bottom row shows “- - -”, then there will not be any “Average Heart Rate”, “Time
in Zone” or “Calorie Consumption” display.
7. The “Calorie Consumption” (shown in KCAL) depends on weight and heart rate of user, and the time lasted
H
OW TO SET ALARM
Setting the chime:
• Press S1 to set the chime to on or off. When the chime is on, the chime icon is displayed.
Remarks:
1. If the chime function is set to “on”, a “Beep” sound will be given on every full hour and there will be button confirmation sound.
2. If there is no button operation for about 3 minutes in setting mode, the watch will return back to Time mode automatically.
30
S1
chime “off”
chime “on”
CHIME ICON
